The Chinese Center for Disease Control and Prevention has successfully developed two chlorine-based low-temperature disinfectant formulations!
Mar 11,2021
To further strengthen current epidemic prevention and control efforts and address the challenge of low-temperature disinfection in China, the Chinese Center for Disease Control and Prevention, in accordance with the arrangements and requirements of the State Council Joint Prevention and Control Mechanism and the Party Leadership Group of the National Health Commission, has, since… 2020 year 6 month 17 Japan has launched research into a new low-temperature disinfection technology. Taking into account factors such as technical feasibility, safety and reliability, ease of application, and cost-effectiveness, after undergoing… 5 After more than a month of repeated exploration and research, two low-temperature disinfectant formulations were selected from dozens of candidates, and laboratory and field evaluations of their disinfection efficacy were completed. 2021 year 1 The project was promptly launched as an application pilot in Suifenhe City, Heilongjiang Province, and Qingdao City, Shandong Province. The results demonstrate that the developed low-temperature disinfectant features a simple production process, low raw-material costs, and reliable disinfection performance at low temperatures, effectively addressing the challenges of disinfecting frozen items and their outer packaging in the cold‑climate conditions of northern regions. The relevant information on two chlorine‑based low-temperature disinfectants is hereby announced as follows:
I. Composition and Dosage Forms of Low-Temperature Disinfectants
(1) -18 ℃ Low-Temperature Disinfectant
1. Main ingredients: include sodium dichloroisocyanurate, calcium chloride, and ethanol. When used on-site, -18 The effective chlorine concentration in the low-temperature disinfectant is 0.3% ( 3000mg/L ), the content of anhydrous calcium chloride is 25% , the ethanol content is 9.5% 。
2. Dosage form: Dual-packaging, comprising a powder and a liquid. A The formulation is sodium dichloroisocyanurate powder. B The reagent is a mixed solution of calcium chloride and ethanol.
(2) -40 ℃ Low-Temperature Disinfectant
1. Main ingredients: include sodium dichloroisocyanurate, calcium chloride, ethanol, ethylene glycol, and benzalkonium chloride. When used on-site, -40 The effective chlorine concentration in the low-temperature disinfectant is 0.5% ( 5000mg/L ), the content of anhydrous calcium chloride is 30% , ethanol 9.5% , ethylene glycol 9.9% , benzalkonium chloride 0.09% 。
2. Dosage form: Dual-packaging, comprising a powder and a liquid. A The formulation is sodium dichloroisocyanurate powder. B The formulation is a mixed solution of calcium chloride, ethanol, ethylene glycol, and benzalkonium chloride.
II. Scope and Methods of Use for Low-Temperature Disinfectants
(1) Scope of Use
-18 ℃ low-temperature disinfectant is suitable for -18 Disinfection of surfaces on items and in low-temperature environments of ℃ and above; -40 ℃ low-temperature disinfectant is suitable for -40 Disinfection of surfaces on items and in low-temperature environments of ℃ and above.
(2) Instructions for Use
1. Disinfectant spraying: Used in conjunction with disinfection equipment, with a spray volume of approximately 200 ~ 300mL/m2 , ensuring that the low-temperature disinfectant is applied in sufficient quantity to achieve complete coverage of the target surfaces, and that the disinfection effect… 10min。
2. Soaking disinfection: Place directly into a low-temperature disinfectant, ensuring complete immersion, to achieve the disinfecting effect. 10min。
3. Wiping and disinfection: Ensure that the low-temperature disinfectant is applied in sufficient quantity to fully cover the object being disinfected, allowing adequate contact time for the disinfection process. 10min。
III. Production and Market Launch Requirements
(1) Raw materials and the formulation process are critical to producing qualified products. Strengthen quality control throughout the manufacturing process and rigorously ensure the quality of raw materials. Adhere strictly to the formulation specifications to guarantee a high‑quality, cost‑effective low‑temperature disinfectant; see the table for details. 1 and table 2。
(2) During production, prepare the formulation according to the ingredient list: first dissolve calcium chloride in water, filter after complete dissolution, then add ethanol (or a mixture of ethanol, ethylene glycol, and benzalkonium chloride), stir thoroughly, mix well, and filter to obtain a liquid. B Formulation. Directly portioning sodium dichloroisocyanurate yields a powder formulation. A Dosage.
(3) Prior to market release, low-temperature disinfectants shall undergo product hygiene and safety evaluation in accordance with relevant national requirements and be duly filed.